The straw is not firmly sticked is a common problem of the straw sticking machine, which not only affects the beauty of the product, but also may lead to a decline in consumer experience and even complaints. There are a variety of reasons for this problem, from material selection, mechanical Settings to environmental conditions that can have an impact. Here are some common causes and their solutions:
Reason 1: Insufficient or too much glue
Solution:
· Adjust the glue spray amount: Adjust the opening time or pressure of the glue nozzle on the device control panel to find the most appropriate amount of glue required for paste.
· Change the type of glue: Sometimes the glue you are using may not be suitable for the specific material you are sticking to. Try another brand of glue or glue designed for straw bonding.
Reason 2: Material problems
Solution:
· Change straw packaging film material: Some plastic or coating surface is not easy to bond, try to choose easy to bond materials or do special treatment to increase surface tension.
Reason 3: Poor curing conditions for glue
Solution:
· Adjust the ambient temperature and humidity: Ensure that the temperature and humidity in the working area are suitable for glue curing. Too high or too low will affect the adhesive effect.
· Accelerated drying: Use a fan or heat lamp to help speed up glue drying, shorten waiting time and improve bond strength.
Reason 4: Aging or improper setting of mechanical components
Solution:
· Cleaning and maintenance: Regularly clean the plug of the rubber nozzle, keep the rubber path unblocked, and prevent the residual gum from affecting the flow of new glue.
· Calibration position: Check the distance between the nozzle and the straw to ensure uniform coating and not dripping to avoid voidage.
Reason 5: Human error
Solution:
· Standardized process: Strengthen operator training to ensure that everyone understands the correct operating procedures and precautions.
Reason 6: Improper machine settings
Solution:
· Check parameters: Check and adjust machine Settings, such as glue gun injection mode, frequency, trigger sensitivity, etc., to better suit the current job requirements.
Reason 7: Excessive mechanical vibration
Solution:
· Strengthen the foundation: Ensure that the machine is placed on a smooth ground, and use shock absorbing shims if necessary to reduce vibration transmission.
In summary, taking corresponding measures to correct different root causes is usually an effective way to solve the problem of weak straw adhesion. It is best to make preliminary judgments before implementation, identify the most likely influencing factors, and make targeted adjustments to save time and resources. At the same time, it is recommended to regularly conduct equipment maintenance and operation training, continuously monitor the production process, and take preventive measures.
Union Machinery has been engaged in food machinery customization services since its establishment in 2014, according to customer needs for you to tailor suitable machinery and equipment, for more product information, please refer to: https://www.hnunmachinery.com/Drink-Straw-Sticking-Machine/Drink-Straw-Sticking-Machine.html
Our expertise and advantages will bring you more opportunities and development space.
For personalized, industry-tailored advice and to explore state-of-the-art solutions, please don't hesitate to contact us at info@unmachinery.com
The following is other knowledge related to the straw sticking machine that I have summarized based on long-term work experience, for your reference. I hope it will be helpful to you.
1.The straw sticking machine you’re looking for!
2.How does the straw sticking machine work?
3.Precautions for operating the straw sticking machine!
4.What issues should you pay attention to when choosing a straw sticking machine?
5.What is the secret to the longevity of straw sticking machines?
6.Common faults and solutions of straw sticking machine.
7.How long is the maintenance cycle of the Straw sticking machine?
Product List
HOT PRODUCT
